Reverse Circulation Standard Pump is a type of circulating pump designed for liquids & chemicals with relatively high vapor pressure, low specific gravity, low specific hot liquids. Fluid with a steep vapor pressure curve can evaporate at the motor's heat up and produce cavitation conditions. The circulation / pumping fluid is passed from the casing volute chamber to the rotor chamber through the front bearing housing. After being extracted from the rear cushion housing outlet, the liquid is returned to the vapor zone in the suction tank, via an inverted circulation path. We also sell Hydraulic Pumps.

Standardized Externally Cooled Motor Circulation Pump pump is a type of water-cooled canister pump designed for high-temperature applications to isolate the liquid in the motor part of the unit from the hot-process liquid in the water pump casing with a series of pressure ports located in the front bearing housing or pump casing adapter. This design allows the motor and bearing environment to be at a much lower temperature than the process liquid, enabling the use of standard bearings and motor insulation to significantly reduce long-term and long-term operating and maintenance costs

TEIKOKU TYPE FV STANDARD DESIGNTeikoku Indonesia pump is a chemical service pump for various clean liquids. Available in 304 SS, 316 SS and other high alloy. Available with optional heaters or cooling jackets for motors and pumps. Available with Motorcycle Explosion Proof. the advantage of this Indonesian teikoku pump is that the pump has a compact and low maintenance design, because the pump design makes the motor and pump one unit so that no coupling is needed to connect the pump to the motor.so the pump does not require mechanical seals or gland packing to prevent the pump from leaking.PT. Berkat Solusi Persada is the sole agent / main supplier directly from the Japanese teikoku pump in Indonesia, we also provide maintenance services or spare parts and after sales service if your teikoku pump has problems. 

Standard Externally Cooled Motor Circulation pump is a type of circulating pump combined with an inner cooling circuit determined with a motor-mounted fan ensuring optimum motor utilization. All rotating electric engines generate heat as a result of electrical and mechanical losses in the engine. High loss during initial or dynamic braking. We also sell hydraulic pumps.

Vertical Gas Purged Isolated Motor Circulation Pump is a type of pump with an isolated motor recommended for pumping liquids with high solids concentrations (above 10%). The design of this water pump separates the liquid in the motor part from the solids present in the process stream. The motor cavity is filled with clean liquids that are compatible with the process flow. An auxiliary impeller, located on the rotor assembly, circulates this liquid through a heat exchanger where it is cooled before re-entering the motor.